Oris Caliber Calibre 400
Five days from twin barrels, and the arithmetic is the design: each mainspring stores about two and a half days, so Oris reached 120 hours by fitting two rather than by winding one tighter. It is also built to IGNORE magnetism rather than to be shielded from it, with SILICON for the anchor and escape wheel, on NON-FERROUS axes, because silicon cannot be magnetised at all. Oris cites the Laboratoire Dubois testing it at less than ten seconds a day of deviation after 2,250 gauss, and puts a ten-year warranty and a ten-year service interval behind it. The rotor winds in ONE direction only, on a slide bearing rather than ball bearings: fewer parts, less to wear. Twenty-eight thousand eight hundred vibrations an hour across 30 mm, or thirteen and a quarter lignes.
- power reserve
- 120 h
- 28,800 vph
- 4 Hz
- diameter
- 30 mm
- watches, 1 house
- 16
What the numbers mean on the wrist.
- 38 mm · Oris
- 39 mm · Oris, 5 watches
- 40 mm · Oris, 2 watches
- 41.5 mm · Oris
- 43.5 mm · Oris, 6 watches
- 49.5 mm · Oris
16 watches from 1 house.
The record.
- Maker
- Oris · In-house
- Winding
- Automatic
- Power reserve
- 120 hours
- Frequency
- 4 Hz · 28,800 vph
- Diameter
- 30 mm
- Escapement
- Silicon anchor and escape wheel, on non-ferrous axes
- Finishing
- Twin barrels, each mainspring storing about two and a half days; unidirectional rotor on a low-friction slide bearing; 10-year warranty and 10-year recommended service interval
How does yours keep time?
16 watches carry this calibre. Tell other owners which one you wear and what it gains or loses in a day.
No comments yet. Be the first.